The Glass You UseThe first thing that you should do is use a specific type of glass for your panels. The best option here is to look for anti-reflective glass solutions. That is going to help you gain more energy because the sunlight and rays will not bounce off the panels but rather hit them straight on and get more leverage overall. When you use anti-reflective glass you end up with a stronger rush of energy for your battery backups just for starters. Some energy outputs have seen an increase of 50% due to the glass used in the paneling.
Using The Angles CorrectlyThere’s several angles that your home will have to face the sun. You need to find the best angles and use the panels that you are installing to accentuate the gathering of the sunlight. To do this you’ll need to monitor your home’s exposure to sunlight at various stages of the day and focus on putting the panels at angles that will garner the most light during the day. This may take a few tries so make sure that you measure the light exposure ratio a great deal before you install panels and leave them be. You can always adjust the paneling later but it’s best to measure twice before you install, just in case you find something better than expected.
Clean The Panels OftenThe next big thing that you should adhere to when trying to get more efficient solar paneling is to clean your panels. Many people set and forget their panels. Don’t do that. You need maximum exposure to the sun which means that you’ll need to periodically check, dust, clean, and wipe off your panels. Do not let this go too long without cleaning. This will help you ensure that your panels get maximum efficiency and will pay off dividends.
With the three major tips found here you’ll no doubt get a stronger push forward with the suns rays and will see better percentages with your panels.
For A Free Solar Panel Cleaning or Window Cleaning Estimate Call 949.786.0816 or Send Us A Message